Anderaa Data Instruments
Anderaa Data Instruments specializes in the design and production of safety systems and driver aids for offshore cranes. The company’s Mipeg product range includes crane load monitoring systems with and without recording; operation limit monitors designed to provide warnings and to prevent crane collisions with objects on the offshore installation; and rope speed and direction indicators, which can be programmed to give anti-two block positions and to record rope ton/mile values.
www.aadi.no
APL
APL’s main product range is mooring and product transfer systems for FPSOS, FSOs, shuttle tankers, and standard tankers. These systems include:
• STL - Submerged turret loading
• STP - Submerged turret production
• SAL - Single anchor loading
• SYS - SAL yoke system
• ETP - External turret production
• BTL - Buoy turret loading
The product range also covers bow loading and stern discharge systems for offshore transfer onto and off the vessel, VOC recovery systems for reduction of VOC emissions, and gas to liquids systems.
www.apl.no
Bergesen d.v.
Bergesen Offshore is a specialist provider of FPSOs, the focus being on cost-effective, tanker-base solutions primarily for benign water areas. The company owns and/or operates five vessels offshore West Africa - three oil FPSOs and two gas FPSOs. In addition, the Bergesen Wordwide Group owns and operates one of the first FSOs in the Barents Sea, stationed in Murmansk.
www.bergesen.no
ClampOn
ClampOn supplies non-intrusive instruments for sand/particle monitoring, leak monitoring, and pig detection for topsides and subsea applications. These include production optimization, sand management, well testing, erosion monitoring, leak detection, clean-up tasks, and condition monitoring. The main products are the DSP corrosion-erosion monitor, the DSP particle monitor, the DSP pig detector, and the DSP leak detector.
www.clampon.no
DNV
Established in 1864, DNV is an independent foundation with the objective of safeguarding life, property, and the environment. It is also a leading international provider of services for managing risk. DNV describes itself as a ‘knowledge-based organization.’ Most of its 5,500 employees are highly qualified engineers and technicians. The group has 300 offices in 100 countries and is headquartered in Oslo.
www.dnv.com
Dreggen Crane
Dreggen Crane supplies cranes and lifting equipment to the offshore industry worldwide. The company, founded in 1987, has developed a range of explosion-proof cranes. It employs a staff of around 35, with sales close to $10 million annually. Dregen specializes in cranes for handling of christmas trees, BOPs, risers, and pipes. The cranes are used on drillships, FPSOs, and semisubmersibles. References include Thunder Horse, Khazar, West Navion, Pride Angola and Africa, Valhall, and Mærsk XL1 and XL2.
www.dreggen.no
Epcon
The Epcon CFU is a multi-phase (oil/water/gas) separator with no moving parts. It requires no external energy and is reliable and efficient in the separation process to achieve a high standard of treated water. The CFU also has a smaller volume and shorter retention time than traditional flotation units used offshore currently. Several combined processes, including gas flotation and induced centrifugal inertia forces, act on the fluid components of different specific gravities. The technology has been developed and tested in the North Sea, and is now considered proven.
www.epconoffshore.com
Frank Mohn Flatoy
Frank Mohn Flatoy manufactures high-reliability pumping systems. Products include water injection pumps, firewater pump systems, high capacity electric submersible pumps, and oil recovery equipment such as oil skimmers and emergency offloading systems. Service is offered during all phases of a project, from feasibility studies to operations. Frank Mohn Services AS, the company’s global service organization, provides training, technical services, spare parts, and repairs.
www.framo.com
Hydro
Hydro is a Fortune 500 energy and aluminum supplier operating in more than 40 countries. The company is a leading offshore producer of oil and gas, the world’s third-largest aluminum supplier and at the forefront of developing renewable energy sources. The group employs 36,000 personnel.
www.hydro.com
Innovation Norway
Innovation Norway is a new organization that took over the tasks of the Norwegian Industrial and Regional Development Fund, the Norwegian Trade Council, the Government Consultative Office for Inventors, and the Norwegian Tourist Board on Jan. 1, 2004. Innovation Norway offers products and services to help develop the regions, increase innovation in industry throughout Norway, and promote Norwegian industry and Norway as a tourist destination. It has offices in all Norwegian counties and more than 30 countries worldwide with staff providing knowledge of local and international factors for business purposes.
www.innovationnorway.no
Karmoy Winch
Karmoy Winch produces deck equipment for ships worldwide. This year the company has delivered one waterfall working/towing winch with 150 ton pull capacity on the first drum layer to Eidesvik for a new supply vessel. Other recent deliveries include tug winches for newbuildings to tug owners Bukser & Bjergning, EM.Z. Svitzer, and Ostensjo. Karmoy Winch is also supplying its Karm Fork & Towingpin systems to numerous anchor handler supply vessels.
www.karmoy-winch.no
Karmsund Maritime
Karmsund Maritime Offshore Supply has devised a new leak test method for flanges with ring joints. This determines whether tightness has been achieved on all sealing surfaces before the flange and pipe are subjected to internal pressure, as well as monitoring the flange connections for future leakage. The technique involves pressurizing the annular space above and below the seal ring using test gas. If no pressure loss is recorded, the seal is deemed to be tight. The test gas is applied using simple portable equipment, designed to enable flanges to be tested on a one-off basis without having to pressurize entire systems.
www.kamos.no
Maritime Well Service
Maritime Well Service describes itself as Aker Kværner’s ‘Centre of Excellence for Well Intervention Technology.’ The company supplies wireline, tractor, and cased hole logging services to the North Sea. It is also experienced in the management and execution of integrated well service contracts. MSW specializes in mechanical wireline operations and data acquisition with all cable sizes.
www.mws.no
M-Reel
Modular Reel was established in 2003 as a service company/supplier of reeled product handling equipment. The company has developed a mobile, DNV IL0 CG3-certified, 9.2 m, 350 t SWL module-based installation reel. The M-Reel can be configured for various core diameters and dividers and reduces the return cost of empty reels. Modular Reel will also assist in finding solutions for loading reeled products onto its system.
www.m-reel.com
Odim
Odim, established in 1974, offers a full range of advanced offshore handling systems and says it is the market-leading supplier of integrated multiple winch and cable handling equipment. During the last five years, the company’s focus has been on developing submarine cable and synthetic fiber rope handling systems for deep and ultra-deepwater applications, including module lifts and subsea well intervention. Core engineering competencies include electro-hydraulic system design, automation, and multiple system integrated controls.
www.odim.no
ONS 2006
ONS 2006 will be staged Aug. 22-25. The ONS conference and exhibition has been staged in Stavanger every other year since 1974. The city’s associated oil festival provides a unique opportunity to combine business with relationship building. In 2004, 1,145 exhibitors from over 31 countries filled 17,189 sq m of stand space; over 1,500 delegates attended the conference, and 33,757 people from 89 countries visited the four-day event.
www.ons.no
Rapp Bomek
Rapp Bomek manufactures and designs advanced fireproof and explosion-proof doors. Products are tested to all relevant specifications and are type approved by DNV, Lloyds, and USCG for fixed and floating platforms. The doors are manufactured under a strict ISO 9001 QA system. Deliveries to North Sea platforms are still in service after more than 24 years. More recent references include Grane, Kvitebjorn, and Valhall off Norway; South Pars in Iran; Devils Tower, Horn Mountain, and Medusa in the Gulf of Mexico; and Bonga/Asabo off Nigeria.
www.rappmarine.com
Rotator
Rotator designs and manufactures subsea and topside control valves, subsea chemical injection valves, and other control panels and systems used by the oil and gas industry. The emphasis in subsea valve designs is on reliability and adaptability for applications in 10,000 ft of water or beyond. The company, founded in 1959 as a repair business, today employs around 100 skilled personnel and craftsmen. Its factory features a modern machine shop with computer-numerically controlled and N.C. machines. Other facilities include equipment for deepwater valve tests, high pressure testing, and multiple clean rooms. All products are tested thoroughly prior to delivery.
www.rotator.no
Viking Technology
Viking Technology has introduced two new products. The UniRough power tong is a new concept parked concentrically around the drillstring. It can handle pipe dimensions from 2 3/8-in. to 20-in. (drill pipe, drill collars, tubing, casing), with three easily replaceable clamp elements. UniWrench is a standbuilding tool combining spinner and torque tong for integration into the drillfloor.
www.v-tech.no
